2011 nissan altima mass air flow sensor cleaning




2011 nissan altima mass air flow sensor cleaning

Article Navigation:
  • Photo
  • P – Meaning, Causes, Symptoms, & Fixes – FIXD Automotive
  • Video
  • RELATED PAGES
  • Replaced the MAF sensor(twice), had the ECM reprogrammed, cleaned the throttle body. The light kept coming back on. My issue was solved.

    After changing the mass air flow sensor 2 times I finally got a Nissan Mass So BEFORE YOU BUY the MAF sensor, clean your Throttle Body.

    FACT! Nissan is the third in the Japanese automakers' rating (after Toyota and Honda) and the 8th in the world rating. The most popular car is Nissan Qashqai. The name "Qashqai" is taken from the name of the tribe living in Iran.

    Clean your MAF (Mass Air Flow) sensor when it's dirty rather than replace this $ part. Find out what to know about a MAF sensor cleaner.

    2011 nissan altima mass air flow sensor cleaning

    2011 nissan altima mass air flow sensor cleaning

    Engine light still on for maf. In most cases, a faulty mass flow sensor has a specific code that will generate during computer diagnostics, and is usually easy to determine with computer testing equipment. That solved the problem for me. Used Cars For Sale.

    2011 nissan altima mass air flow sensor cleaning

    2011 nissan altima mass air flow sensor cleaning

    2011 nissan altima mass air flow sensor cleaning

    2011 nissan altima mass air flow sensor cleaning

    2011 nissan altima mass air flow sensor cleaning

    How to Detect and Clean a Faulty Mass Airflow Sensor - CarsDirect

    The mass airflow sensor MAF in your Nissan vehicle measures the amount of air going into the engine. Follow some simple steps for cleaning to restore your MAF sensor's operation and engine performance to normal.

    Park your Nissan vehicle in a safe place, with enough room for you to work around the front of the car. Locate the MAF sensor electrical connector. The sensor is mounted in the fresh air intake duct--close to the throttle body, fuel-injection system or air-filter housing, depending on your Nissan model.

    2011 nissan altima mass air flow sensor cleaning

    Remove the MAF sensor mounting screws with a Phillips-head screwdriver. Set the screws in a safe place; then remove the air-cleaner duct or air-intake assembly to reach the sensor inside the system.

    Depending on the model of your vehicle, you might need to remove one or more clamps using a standard or Phillips-head screwdriver, or disengage wire clips to take the air-intake assembly apart. Dismount the sensor from the air-intake assembly, being careful not to damage the sensor's electronic sensing elements. See Tips for more information. Rub dirt and contaminants off the sensor elements using a soft brush, until the wires and sensor components are completely clean.

    2011 nissan altima mass air flow sensor cleaning

    Mount the cleaned MAF sensor in the air-intake assembly. Install the air-intake assembly, plug in the sensor electrical connector and install the sensor mounting screws.

    This article was written by the It Still Runs team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. To submit your questions or ideas, or to simply learn more about It Still Runs, contact us.

    Step 1 Park your Nissan vehicle in a safe place, with enough room for you to work around the front of the car. Step 2 Locate the MAF sensor electrical connector.

    2011 nissan altima mass air flow sensor cleaning

    Step 4 Dismount the sensor from the air-intake assembly, being careful not to damage the sensor's electronic sensing elements. Tip Consult your owner's manual or vehicle service manual to identify or locate components. You can buy one at most auto parts stores, or consult one for free at most public libraries.

    You can buy electrical component cleaner at any electronic-parts store; most auto-parts stores carry mass airflow sensor cleaner as well. Warning When unplugging the MAF sensor from its electrical circuit, make sure the ignition key is in the "Off" position.

    2013 - 2018 Nissan Altima code P0101 mass air flow sensor DIY Fix



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲